Residential Air Conditioning
Regular service on air conditioning system is critical for the operation and comfort of a home. If the air conditioning system is not maintained it can lead to expensive and timely repairs also air quality and comfort for the occupants may be reduced.Monaro Air Canberra can provided regular maintenance on all residential air conditioning systems and recommends a service every 12 months.
Brands Serviced: Temperzone Air Conditioning, LG Air Conditioning, Hitachi Air Conditioning, Bonaire Air Conditioners, YORK Air Conditioners, Carrier Air Conditioning, Mitsubishi Air Conditioner, Daikin Air Conditioner, Fujitsu Air Conditioner, Toshiba Air Conditioner, Panasonic Air Conditioning, and MHI (Mitsubishi Heavy Industries).
The following is a list of tasks performed during an annual service for a Reverse Cycle Ducted Air Conditioner and a wall mounted split system air conditioner. If a fault is detected during the service that cannot be rectified without the use of parts the client will be notified and a separate quotation will be supplied.
Please contact Monaro Air for all your canberra air conditioning services.
Tasks performed during an annual service of a Wall Mounted Split System Air Conditioner
- Clean condensate drain and check for correct operation, report any problems
- Clean indoor unit coil
- Clean outdoor unit coil.
- Tighten all electrical terminals on indoor and outdoor unit.
- Check amp draw of compressor, report any problems
- Clean filters and check integrity of filter media, report any problems.
- Clean indoor unit.
- Clean outdoor unit.
- Leak test refrigeration circuit, report any leaks if found.
- Check temperature difference between return air and supply air.
- Check unit for correct operation, report any problems
- Check outdoor unit is secure and level, adjust if required and report any problems.
- Prune any foliage that may be causing problems to the operation and air flow of outdoor unit only after approval from the client.
- Check contactor and overload if applicable for wear and correct operation, tighten terminals, adjust if required and report any problems.
- Check for correct operation of HP (High Pressure) and LP (Low Pressure) controls, adjust if required and report any problems.
- If client or tenant requires - full demonstration of the operation of the unit.
- Full service report on completion of maintenance to the client.
Tasks performed during an annual service of a Reverse Cycle Ducted Air Conditioner.
- Clean condensate drain and check for correct operation, report any problem
- Clean indoor unit coil
- Clean outdoor unit coil.
- Tighten all electrical terminals on indoor and outdoor unit.
- Check amp draw of compressor report any problems
- Clean filters and check integrity of filter media, report any problems.
- Clean indoor unit.
- Clean outdoor unit.
- Check indoor fan motor for correct operation and V-Belts and pulleys if applicable, adjust if required and report any problems.
- Check electric duct heaters for correct operation, check higher limit and safeties report any problems.
- Check amp draw of electric duct heaters if applicable, report any problems.
- Leak test refrigeration circuit, report any leaks if found.
- Check temperature difference between return air and supply air, report any problems.
- Check unit for correct operation, report any problems
- Prune any foliage that may be causing problems to the operation and air flow of outdoor unit only after approval from the client.
- Check for correct operation of HP (High Pressure) and LP (Low Pressure) controls, adjust if required and report any problems.
- Check contactor’s and overload for wear and correct operation, tighten terminals and report any problems.
- Check temperatures of all zones and condition, adjust if required report ant problems.
- Clean all registers and air diffusers.
- Check all duct actuators if applicable report any problems.
- Check air balancing and air flows adjust if required report any problems.
- Check parameters of controls adjust if required program timer if requested and applicable. Report any problems
- Check calibration of temperature thermostat, report any problems.
- Check outdoor unit is secure and level, adjust if required and report any problems.
- If customer requires - full demonstration of the operation of the unit.
- Full service report on completion of service to the client.
